WTA online for T3 (DS3) Line Prices and Providers.

Find T3(DS3)Telecom line Providers & Prices

If you need fractional, full or bonded T1 - T3 (DS1 - DS3) telecom lines & routers, OC1 to OC196 Optical Carrier lines, VoIP PBX systems, ISDN PRI voice lines, VoIP, security or integrated telecom solutions. . .

Then Let WTA provide quotes from up to 30+ Tier 1 & Tier 2 competing vendors at no cost or obligation to you.

Why WTA. . .

We have years of experience in helping businesses get the best quotes to satisfy their T3 needs. In some cases we can assist you

NO OBLIGATION QUOTES
Immediate Response!





or call toll free: 1-866-524-2840

in getting different primary and backup vendors on the same invoice. For small companies we deliver Fortune 100 IT director work at no cost. For medium to large businesses, we free up your engineering team to concentrate on their work rather than spending time selecting vendors and prices. If time is money, why spend yours instead our ours?

We become part of your staff at no cost to you.

WTA exists to help find the right solutions for you, not for the telecom vendor

We work with multiple T3 vendors to achieve the best services for your specific needs.

We do not stop until you are satisfied. We want your future business, not just a quick sale.

WTA IS AN INDEPENDENT REPRESENTATIVE OF BUSINESS OWNERS AND MANAGERS.

T3 lines...

- Are coax or fiber optic lines that run into a router.
- Can go any distance from a vendor's POP by using repeaters.
- A full T3 line transmits at 44.736 Mbps each direction at same time.
- A fractional T3 line is a line that transmits less than a full T# line.
- The average fractional line starts at 10 Mb and is billed at a fixed rate.
- A burstable T3 line is a full T3 line where one pays only for actual usage.
- A burstable line starts at 5 Mb and is billed in increments of 1 meg up to 45 meg.
- A bonded T3 line is multiple T3 channels. Usually an OC1 line is offered instead.
- An integrated T3 line is a T3 with some DS0 channels voice, others data.
- A router determines the voice/data mix of the T3 line.
- A router can treat each DS0 channel separately or all 672 DS0 channel as one data line.

T3 orders...

- Can go to any room in an office you select.
- Is installed within 30 to 60 days after contract is approved, averages 15 to 25 days.
- Contract is normally approved within 3 to 5 days of signing.
- Main delay in approval is the credit application.
- All types of T3 lines come in one year, two year or three year contracts.
- Backup redundancy is best when having two distinct vendors with two different POPs.
- Backup line is usually 2 to 6 bonded T1 lines providing 3 to 9 meg data rates.
- Routers can come from the vendor, customer or WTA (Cisco, Tasman, others).

T3 costs...

- Average cost burstable starts at $2,000/mo. at 5Mb, each additional Mb adds approximately

$180.00
- Average cost fractional starts at $3,500 for 10Mb, $6,500 for 23Mb.

- Average cost Full T3 (all data) ranges from $4,000 to $9,000/Mo.

- T3 Line costs vary by managed or un-managed (customer owned) router.

- T3 Line costs vary by distance from the vendors POP (Point of Presence).

- Selected vendors offer lowest price with one year contracts vs. others with 3-year contracts.

- Cost of a router can vary with voice/data mix, cost or the T3 line will be constant.

- A router can be maintained either by the user or by the T3 line vendor at cost.

DEFINITIONS . . .

T3 lines are technically referred to as T3 or DS3 channels.

1 T3 channel = 28 T1 channels = 672 DSO channels = 44.736Mb.

1 T1 channel = 1 DS1 channel = 24 DSO channels = 1.544Mb.

1 DSO channel can be either 64Kbps of digital data OR one voice line.

DS = Digital Signal channel.

Bidirectional = can upload and download data at the same time.

Mbps = Million bits per second = 1,048,576 bits = 1Mb.

Kbps = thousand bits per second = 1024 bits = 1Kb.

A Bit = one binary digit (a 1 or a 0).

POP = Point of Presence which is the location a line attaches to a providers network.