WTA for Providers & Prices on T1 (DS1), T3 (DS3) & ISDN PRI T1 voice & data lines.

Find Multiple T1 (DS1) Providers & Prices

If you need T1 Routers, Full T1, Fractional T1, Burstable T1 or Integrated T1 lines or Fractional T3 Solutions. . .

Then Let WTA provide quotes from up to 30+ Tier 1 & Tier 2 competing vendors at no cost or obligation to you.

Why WTA. . .

Due to our volume we get special pricing and treatment. We will not loose a deal based on price. While we can qualify you in seconds with some vendors, we will take the time needed to qualify

NO OBLIGATION QUOTES
Immediate Response!





or call toll free: 1-866-524-2840

you for special pricing to get you lower than rack rates. While you may deal with technical service, we work with senior and top level management when needed, on your behalf. If time is money, why spend yours instead of ours?

We become part of your staff at no cost to you.

WTA exists to help find the right solutions for you, not for the telecom vendor.

We work with multiple T1 vendors to achieve the best services for your specific needs.

We do not stop until you are satisfied. We want your future business, not just a quick sale.

WTA IS AN INDEPENDENT REPRESENTATIVE OF BUSINESS OWNERS AND MANAGERS.

Specials:

*** T1 SPECIALS: full T1 includes router and install for $499 - Fractional T1 from $299 See if you qualify

*** Integrated T1 with 5+ voice lines with local & ^*unlimited Long Distance and Data from $505 Details

T1 (DS1) lines...

- is a two pair of twisted copper wires, one pair for each direction.

- can go any distance by using repeaters from a vendor's central switch.

- a full T1 line transmits at 1.544 mbps bidirectional.

- a full T1 line carries 24 DS0 channels.

- a DS0 channel can be either 64 Kbps of digital data OR one voice line.

- a fractional T1 line is a line with fewer than 24 DS0 channels, thus costing less.

- a bonded T1 line is multiple T1 lines running to the router (T1x2 to T1 x 6).

- bonded lines transmit from 3 to 9Mb. Anything higher uses a fractional T3 line.

- a point to point T1 line is one that is a direct connection to another office/building

- an integrated T1 line is a T1 with some DS0 channels voice, other channels data.

- a dynamic T1 line is where unused voice lines convert to data lines.

- a router determines the voice/data mix of the various T1 lines.

- a router can treat each DS0 channel separately or all 24 as one data line.

T1 orders...

- can go to any room you have for a line switching room.
- Usually installed within 30 to 45 days after contract is approved.

- WTA usually gets faster results on install, shortening it by 1 to 10 days.
- contract is normally approved within 3 to 5 days of signing.
- main delay in approval is the credit application.
- all types of T1 lines come in one year, two year or three year contracts.
- backup redundancy can be achieved by a router that handles a DSL backup line.
- routers can come from the vendor, customer or WTA (Cisco, Tasman, others).

T1 costs...

- Ave cost of a fractional T1 line starts at $299/month for 378 Kbps bidirectional
- Ave cost a full T1 (all data) ranges from $370 to $669/month
- T1 line costs vary by managed (vendor supplied) or unmanaged (customer owned) router
- T3 line costs vary by distance from the vendor's POP (with selected vendors)
- selected vendors may offer lowest price with one year contracts vs. others 3 year contracts
- Standard contracts offer lowest prices at 3 years, we can sometimes get it at 1 year- a router

can be maintained either by the user or by the T1 line vendor at extra cost.

DEFINITIONS...
T1 lines are technically referred to as T1 or DS1 channels.
1 T3 channel = 28 T1 channels = 672 DS0 channels = 44.736 Mbps.
1 T1 channel = 1 DS1 channel = 24 DS0 channels = 1.544 Mbps.
1 DS0 channel can be either 64 kbps of digital data OR one voice line.
DS = Digital Signal channel.
Bidirectional = can upload and download data at same time.
Mbps = mega = million bits per second = 1,048,576 bits = 1Mb.
Kbps = thousand bits per second = 1024 bits = 1Kb. A bit = one binary digit (a 1 or a 0).
POP = Point of Presence which is the location a line attached to a providers network.